Accessory Rail Systems / Dive Lights

Model#: 920024-000 Looking for a way to mount your SOLA Light to your OTS Guardian FFM? This is what you need. Included in this kit is the following: - Rail System designed to fit the OTS Guardian FFM - Rail Slide specially designed to mount Light & Motion SOLA Light **Note: You will need a Light & Motion D-Ring Kit to attach the SOLA Light to this Slide. This is sold seperately.** **Because these items are not manufactured by OTS they are subject to change at anytime without notice and the attached photo may or may not be an exact representation of what is included**

Read more less

Model#: sola800dSimply Better. ¼ the size and brighter than any hand held dive light on the market with both Spot and Flood beams at your fingertips and a convenient hand mount. SOLA 800We asked divers what they wanted in a dive light. They told us: spot & flood beams, small, lightweight, easy to use, easy to recharge. Introducing the Sola 800; its the lightest, brightest and smallest dive light you have ever seen.Lumens (Flood/Spot):High- 800/500Med- 400/250Low- 200/125Run Time (Flood/Spot):High- 60/70 MinMed- 120/140Low- 240/280Charge Time:150 MinutesSize & Weight:57mm x 101mm &305 gr. w/ Wrist StrapReady To GoSola dive lights have a factory sealed body so you never need to worry about flooding. Control is accomplished through a magnetic coupled slider on the top of the body. Slide forward or back to turn on. Hold forward or back to turn off.Three indicator lights behind the bezel report the power (high=3 lights, medium=2 lights, low = 1 light). Indexing back changes mode between spot and flood. Indexing forward increments the power levels. **Because these items are not manufactured by OTS they are subject to change at anytime without notice and the attached photo may or may not be an exact representation of what is included**

Read more less

Model#: 920021-001 Interspiro Divator MKII "AGA" Accessory Rail Universal System. (Includes Rail with Universal Slide).The accessory rail system easily attaches to the Interspiro Divator MKII "AGA" full-face mask and makes it possible to mount various lights, cameras, and other devices to the sides of the mask. The accessory rail system easily attaches to the Interspiro Divator MKII "AGA" full-face mask and makes it possible to mount various devices to the sides of the mask. Dive lights, video lights, video cameras, sonar, manifold blocks, and welding visors are just a few examples of the equipment that works well with the rail system. Devices are attached to the removable slide and then slide on to the rail. The slide is released from the rail by pressing the release button. The rail stays mounted to the mask, while the devices are attached to slides. The camera, lights and other devices are then changed by simply sliding them on or off the rail. This quick disconnect feature allows surface support to quickly exchange or replace devices as the mission dictates without removing the mask from the diver, or the diver from the water. One rail may be used or two may be mounted (one on each side). The attachment method does not interfere with commonly used surface breathing valve. Attaching the rail system to the AGA mask makes it possible for a diver to have both hands free to accomplish difficult tasks under water. No tools are used to attach the rail system to the mask. Two nuts are simply tightened by hand to secure the rail system to the mask. No modifications are needed, and it is easily removed for mask maintenance. The Accessory Rail System can be purchased with either the universal mount, which can accept the previously mentioned devices, or it can also be purchased with the S-Sun Compact LED Light (see other items). The rail system is not mass produced—each one is made and assembled individually, and manufactured using quality materials. This rail system will NOT fit on a Guardian FFM. It is designed to fit the AGA mask only. **Because these items are not manufactured by OTS they are subject to change at anytime without notice and the attached photo may or may not be an exact representation of what is included**

Read more less

Model#: 920030-000Interspiro Divator MKII (AGA) Accessory Rail Light System w/ SOLA 800 SOLA 800We asked divers what they wanted in a dive light. They told us: spot & flood beams, small, lightweight, easy to use, easy to recharge. Introducing the Sola 800; its the lightest, brightest and smallest dive light you have ever seen.Lumens (Flood/Spot):High- 800/500Med- 400/250Low- 200/125Run Time (Flood/Spot):High- 60/70 MinMed- 120/140Low- 240/280Charge Time:150 MinutesSize & Weight:57mm x 101mm &305 gr. w/ Wrist StrapReady To GoSola dive lights have a factory sealed body so you never need to worry about flooding. Control is accomplished through a magnetic coupled slider on the top of the body. Slide forward or back to turn on. Hold forward or back to turn off.Three indicator lights behind the bezel report the power (high=3 lights, medium=2 lights, low = 1 light). Indexing back changes mode between spot and flood. Indexing forward increments the power levels. **Because these items are not manufactured by OTS they are subject to change at anytime without notice and the attached photo may or may not be an exact representation of what is included**

Read more less

Model#: 920021-000Interspiro Divator MKII "AGA" Accessory Rail Light System. (Includes Rail, Slide, and LED Light) Dive With Your Hands FREE!The accessory rail system easily attaches to the Interspiro Divator MKII "AGA" full-face mask and makes it possible to mount various lights, cameras, and other devices to the sides of the mask. This version has the S-Sun LED Diver Headlight mounted to the accessory slide. This light is rated at 0.75W (58 Lumen), and will burn for approx 10 hours on 2 AA batteries. Other devices can be attached to the accessory rail by adding additional “Universal Slides” (purchased separately). Cameras, lights, and other devices are then changed by simply sliding them on or off the rail. This quick-disconnect feature allows surface support to quickly exchange or replace devices as the mission dictates without removing the mask from the diver, or the diver from the water. Each Accessory Rail can accept 2 slides that can be purchased separately. One rail may be used, or two may be mounted (one on each side). The attachment method does not interfere with commonly used surface breathing valves.Attaching the rail system to the AGA mask makes it possible for a diver to have both hands free to accomplish difficult tasks underwater.No tools are used to attach the rail system to the mask. Two nuts are simply tightened by hand to secure the rail system to the mask. No modifications are needed, and the rail is easily removed for mask maintenance.Once devices are mounted to the removable “Slides” they can be slid onto any other dive mask, or dive hat, that has an Accessory Rail mounted.The rail system is not mass produced—each one is made and assembled individually, and manufactured using quality materials.This rail system will NOT work on the Guardian FFM. It is designed to fit on the AGA mask only.**Because these items are not manufactured by OTS they are subject to change at anytime without notice and the attached photo may or may not be an exact representation of what is included**

Read more less

Model#: 920013-000 GFFM Accessory Rail Universal System. (Includes Rail with Universal Slide).The accessory rail system easily attaches to the Guardian full-face mask and makes it possible to mount various lights, cameras, and other devices to the sides of the mask. The accessory rail system easily attaches to the Guardian full-face mask and makes it possible to mount various devices to the sides of the mask. Dive lights, video lights, video cameras, sonar, manifold blocks, and welding visors are just a few examples of the equipment that works well with the rail system. Devices are attached to the removable slide and then slide on to the rail. The slide is released from the rail by pressing the release button. The rail stays mounted to the mask, while the devices are attached to slides. The camera, lights and other devices are then changed by simply sliding them on or off the rail. This quick disconnect feature allows surface support to quickly exchange or replace devices as the mission dictates without removing the mask from the diver, or the diver from the water. One rail may be used or two may be mounted (one on each side). The attachment method does not interfere with commonly used surface breathing valve. Attaching the rail system to the Guardian mask makes it possible for a diver to have both hands free to accomplish difficult tasks under water. No tools are used to attach the rail system to the mask. Two nuts are simply tightened by hand to secure the rail system to the mask. No modifications are needed, and it is easily removed for mask maintenance. The Accessory Rail System can be purchased with either the universal mount, which can accept the previously mentioned devices, or it can also be purchased with the S-Sun Compact LED Light (see other items). The rail system is not mass produced—each one is made and assembled individually, and manufactured using quality materials. **Because these items are not manufactured by OTS they are subject to change at anytime without notice and the attached photo may or may not be an exact representation of what is included**

Read more less

Model#: 920022-000GFFM Accessory Rail Light System w/ SOLA 800 SOLA 800We asked divers what they wanted in a dive light. They told us: spot & flood beams, small, lightweight, easy to use, easy to recharge. Introducing the Sola 800; its the lightest, brightest and smallest dive light you have ever seen.Lumens (Flood/Spot):High- 800/500Med- 400/250Low- 200/125Run Time (Flood/Spot):High- 60/70 MinMed- 120/140Low- 240/280Charge Time:150 MinutesSize & Weight:57mm x 101mm &305 gr. w/ Wrist StrapReady To GoSola dive lights have a factory sealed body so you never need to worry about flooding. Control is accomplished through a magnetic coupled slider on the top of the body. Slide forward or back to turn on. Hold forward or back to turn off.Three indicator lights behind the bezel report the power (high=3 lights, medium=2 lights, low = 1 light). Indexing back changes mode between spot and flood. Indexing forward increments the power levels. **Because these items are not manufactured by OTS they are subject to change at anytime without notice and the attached photo may or may not be an exact representation of what is included**

Read more less

Model#: 920023-000GFFM Accessory Rail Light System w/ SOLA 1200 SOLA 1200We asked divers what they wanted in a dive light. They told us: spot & flood beams, small, lightweight, easy to use, easy to recharge. Introducing the Sola 1200; its the lightest, brightest and smallest dive light you have ever seen.Lumens (Flood/Spot):High- 1200/500Med- 600/250Low- 300/125Run Time (Flood/Spot):High- 70 minsMed- 140 minsLow- 280 minsCharge Time:2.5 hoursSize & Weight:2" x 2.1" x 2.1"254 gr. w/ Wrist StrapReady To GoSola dive lights have a factory sealed body so you never need to worry about flooding. Control is accomplished through a magnetic coupled slider on the top of the body. Slide forward or back to turn on. Hold forward or back to turn off.Three indicator lights behind the bezel report the power (high=3 lights, medium=2 lights, low = 1 light). Indexing back changes mode between spot and flood. Indexing forward increments the power levels. **Because these items are not manufactured by OTS they are subject to change at anytime without notice and the attached photo may or may not be an exact representation of what is included**

Read more less

Model#: 920012-000GFFM Accessory Rail Light System. (Includes Rail, Slide, and LED Light) Dive With Your Hands FREE!The accessory rail system easily attaches to the Guardian full-face mask and makes it possible to mount various lights, cameras, and other devices to the sides of the mask. This version has the “Inodive LED Dive Light” mounted to the accessory slide. This light is rated at 1watt (80 Lumen), and will burn for approx..4 hours on 2 AA batteries. A double O-ring seal, and magnetic switch, help insure the watertight integrity of the light to 150 feet. Other devices can be attached to the accessory rail by adding additional “Universal Slides” (purchased separately). Cameras, lights, and other devices are then changed by simply sliding them on or off the rail. This quick-disconnect feature allows surface support to quickly exchange or replace devices as the mission dictates without removing the mask from the diver, or the diver from the water. Each Accessory Rail can accept 2 slides. Additional slides can be purchased separately. One rail may be used, or two may be mounted (one on each side). The attachment method does not interfere with commonly used surface breathing valves.Attaching the rail system to the Guardian mask makes it possible for a diver to have both hands free to accomplish difficult tasks underwater.No tools are used to attach the rail system to the mask. Two thumb screws are simply tightened by hand to secure the rail system to the mask. No modifications are needed, and the rail is easily removed for mask maintenance.Once devices are mounted to the removable “Slides” they can be slid onto any other dive mask, or dive hat, that has an Accessory Rail mounted.The rail system is not mass produced—each one is made and assembled individually, and manufactured using quality materials.**Because these items are not manufactured by OTS they are subject to change at anytime without notice and the attached photo may or may not be an exact representation of what is included**

Read more less